Results for "braided supply line"

Supply Shutoff Easy 20–40 minutes 7 👍 0

Toilet Supply Line Dripping at Connection Fix

Nobody wants to spot this, but looking at the base of my toilet tank right now and there's a slow, steady drip forming right at the point where the supply line screws into the bottom of the tank — there's already a small damp patch on the floor underneath it. The connection itself looks intact, nothing is visibly cracked or broken, but there's clearly moisture weeping out from around that plastic nut every time the tank refills. I've gone ahead and snugged the nut a little tighter by hand but the drip came right back once the water pressure kicked in again. Is this something wrong with the nut itself, or is there a washer or seal inside that I need to replace? I'd really like to fix this without pulling the whole line off if I can help it.…more

Read answer

Supply Shutoff Easy 30–45 minutes 11 👍 0

Why Is My Toilet Supply Line Leaking?

Looked under the tank this morning and spotted a slow drip coming from the supply line — there's already a small puddle forming on the floor. Got my tools out and I'm ready to tackle this myself, I just want to make sure I understand what's actually causing it before I start swapping parts. The line doesn't look obviously cracked, so I'm not sure if it's the fittings, the washers, or the line itself that's the problem. Is this something I can diagnose and fix on my own, or are there situations where I'd need to call someone in?…more

Read answer

Fill Flush Valves Easy 30–45 minutes 9 👍 0

Toilet Tank Not Filling? Here's Why & How to Fix It

Nobody wants to discover that their vacation home toilet is struggling to fill the tank — especially when you've just arrived and you're already dealing with a list of things to check on. My toilet is running through water like crazy trying to refill, or sometimes barely filling at all, and it's making the whole flush cycle take forever. I noticed it right when I got here this trip, and the tank just sits there making a hissing noise without ever reaching a normal water level.

I'm not sure if it's something that happened while the house was sitting empty or if it's been a gradual thing I missed on my last visit. Either way, the toilet is burning through refill attempts and either running constantly or just not completing the fill cycle at all. Would love to know what's going on and how to keep it from happening again.…more

Read answer

Leaks Base Floor Medium 30–90 minutes depending on cause 17 👍 0

Water Leaking Around Toilet Base? Here's Why

During my first week settling into this rental, I noticed water collecting around the bottom of the toilet. I've never dealt with this before and honestly wasn't sure if it was just condensation or something more serious. The floor around the base is consistently damp, and it seems to get worse after flushing. Is this a wax ring issue, or could it be something simpler? I don't want to panic my landlord over nothing, but I also don't want to ignore something that could cause real damage.…more

Read answer

Leaks Base Floor Medium 30–90 minutes depending on cause 9 👍 0

Water Around Toilet Base? Here's Why & How to Fix It

My maintenance team flagged a water issue at one of the units — there's a small but persistent puddle forming around the base of the toilet, and I'm trying to narrow down the cause before I send someone in to fix it. The building's maintenance guide says the toilet was recently reseated with a new wax ring, so that should rule out a failed seal — but the water keeps coming back regardless.

What's throwing me off is that the manual points to the wax ring as the default culprit for base leaks, yet I'm not sure that's actually what's happening here given the recent work. I need to figure out whether we're dealing with a condensation issue, a loose connection somewhere, or something else entirely before authorizing a full toilet pull.…more

Read answer

Install Replace Medium 1–2 hours 13 👍 0

How to Remove an Old Toilet: DIY vs. Pro Guide

Three of my rental units need their aging toilets swapped out, and I'm standing in the plumbing aisle of the hardware store trying to figure out exactly what I need to buy before I start pulling them. I've got a handyman coming to do the actual installs, but I want to have everything on hand and understand the process so I'm not caught off guard if something goes sideways — like a rusted bolt or a cracked flange.

What tools should I have ready, what replacement parts should I grab at the same time, and are there any points in the removal where a landlord really should just step back and call a licensed plumber instead of pushing through? I'd rather know ahead of time what a 'stop and call someone' situation looks like than find out mid-job.…more

Read answer

Bidets Washlets Easy 30–45 minutes 6 👍 0

Bidet Leaking at Supply Connection? Here's the Fix

Nobody in my house ever dealt with plumbing drama until we installed a bidet seat last month — and now there's a steady drip coming from where the hose connects to the water supply. My neighbor put in the same type of add-on bidet years ago and swears she's never had a single problem with it. Meanwhile, I'm mopping up under the toilet every other day and wondering what I'm doing wrong.

The leak seems to be right at the T-valve fitting where it meets the shutoff valve. I hand-tightened everything during install and then gave it an extra turn with pliers like the instructions said, but water just keeps seeping out. Could it be the angle of the connection, the water pressure in our house, or is this something that needs a replacement part?

We have two kids and the bathroom gets heavy use, so I'd really love to fix this properly rather than just slapping a towel down and ignoring it. Hoping someone can walk me through what's actually going wrong and how to sort it out for good.…more

Read answer

Supply Shutoff Easy 5–10 minutes 10 👍 0

How to Shut Off Water to Just Your Toilet

During a conversation with a plumber who came out for a running toilet, he mentioned I'd need to shut off the main water supply to the house before doing anything. That seemed extreme to me — I've seen what looks like a small valve right behind the toilet near the floor, and I always assumed that was specifically for shutting off just the toilet without cutting water to the whole house. Am I wrong about that?

I'm trying to handle some of the simpler repairs myself now that I own this place, and I'd really like to understand how that little valve works and whether it's actually safe to rely on. The plumber made it sound like those valves are unreliable, but is that a reason to bypass it entirely, or is there a way to test it first?…more

Read answer

Bidets Washlets Easy 30–60 minutes 14 👍 0

How to Install a Bidet on an Existing Toilet

Three days of heavy rain last week had me stuck indoors with nothing to do but finally research something I've been putting off — adding a bidet to the main bathroom. My house is older and the bathroom fixtures are original, so I'm a little nervous about making changes without breaking something. I've watched a few videos and it looks manageable, but I want to make sure I understand the full process before I start disconnecting things.

I have an older-style toilet with a standard shut-off valve on the wall behind it. Is there anything I should know before buying a bidet attachment or seat? I don't know whether to go with a simple spray attachment or an electric washlet-style seat, and I'm not sure if my setup will handle either type. Any guidance on the steps involved and what to expect would be really appreciated.…more

Read answer

Install Replace Medium 2–4 hours (including removal and cleanup) 13 👍 0

How to Install a New Toilet: Step-by-Step Guide

My apartment's toilet has to be at least 15 or 20 years old at this point, and it's starting to show its age in a big way — the handle keeps sticking, the flapper goes constantly, and I've noticed some discoloration at the base that worries me. My landlord has given me the green light to swap it out myself if I want to handle it, and honestly I'd rather just have a fresh, efficient unit in there.

I've never pulled and set a toilet before, but I'm reasonably handy and I want to understand what I'm getting into. Are there different ways to approach this job, and what are the main things I should know before I start? I'd hate to get halfway through and realize I'm in over my head.…more

Read answer

Supply Shutoff Medium 45–90 minutes 13 👍 0

Toilet Shutoff Valve Won't Turn Off? Here's Why

Found a slow drip coming from behind the toilet about a month ago — nothing alarming, just a little moisture on the floor that I chalked up to condensation. But it's gotten steadily worse, and now when I try to turn the angle-stop valve fully clockwise to cut the water supply, the flow barely slows down. It's not shutting off the way it should, and I can't tell if the valve is corroded, worn out, or something else entirely.

This is an older home with what looks like original plumbing, and I suspect the hard water here has been doing a number on everything over the years. I've tried cranking the handle as far right as it'll go, but the toilet tank keeps filling like the valve isn't even there. I'd like to figure out whether I can clean or repair the existing valve, or if I need to replace it altogether — and if so, what kind of replacement I should be looking at.…more

Read answer

Product Ranking 2 compared

Toilet Auger vs Plunger

4.5 (6,607 reviews)

Tank Problems Easy 30–45 minutes 7 👍 0

How to Tighten Toilet Tank Bolts Safely

Three times now the toilet tank has started rocking and dripping right before we have guests over — it never fails. Every time we have people over, I'm in the bathroom with a towel mopping up a slow leak from where the tank meets the bowl, and it's embarrassing. I'm pretty sure the bolts holding the tank to the bowl have worked loose over time.

I know porcelain can crack if you overtighten things, so I'm nervous about just grabbing a wrench and going to town on these bolts. Is there a safe way to snug them down without doing more damage than I started with? Are there any signs I should look for that tell me a bolt or gasket needs replacing rather than just tightening?…more

Read answer

Loading more Q&A...

You've seen all 12 Q&A articles!