Results for "rubber washer"

Nobody wants to spot this, but looking at the base of my toilet tank right now and there's a slow, steady drip forming right at the point where the supply line screws into the bottom of the tank — there's already a small damp patch on the floor underneath it. The connection itself looks intact, nothing is visibly cracked or broken, but there's clearly moisture weeping out from around that plastic nut every time the tank refills. I've gone ahead and snugged the nut a little tighter by hand but the drip came right back once the water pressure kicked in again. Is this something wrong with the nut itself, or is there a washer or seal inside that I need to replace? I'd really like to fix this without pulling the whole line off if I can help it.…more

Looked under the tank this morning and spotted a slow drip coming from the supply line — there's already a small puddle forming on the floor. Got my tools out and I'm ready to tackle this myself, I just want to make sure I understand what's actually causing it before I start swapping parts. The line doesn't look obviously cracked, so I'm not sure if it's the fittings, the washers, or the line itself that's the problem. Is this something I can diagnose and fix on my own, or are there situations where I'd need to call someone in?…more

Nobody in my house ever dealt with plumbing drama until we installed a bidet seat last month — and now there's a steady drip coming from where the hose connects to the water supply. My neighbor put in the same type of add-on bidet years ago and swears she's never had a single problem with it. Meanwhile, I'm mopping up under the toilet every other day and wondering what I'm doing wrong.

The leak seems to be right at the T-valve fitting where it meets the shutoff valve. I hand-tightened everything during install and then gave it an extra turn with pliers like the instructions said, but water just keeps seeping out. Could it be the angle of the connection, the water pressure in our house, or is this something that needs a replacement part?

We have two kids and the bathroom gets heavy use, so I'd really love to fix this properly rather than just slapping a towel down and ignoring it. Hoping someone can walk me through what's actually going wrong and how to sort it out for good.…more

Three times now the toilet tank has started rocking and dripping right before we have guests over — it never fails. Every time we have people over, I'm in the bathroom with a towel mopping up a slow leak from where the tank meets the bowl, and it's embarrassing. I'm pretty sure the bolts holding the tank to the bowl have worked loose over time.

I know porcelain can crack if you overtighten things, so I'm nervous about just grabbing a wrench and going to town on these bolts. Is there a safe way to snug them down without doing more damage than I started with? Are there any signs I should look for that tell me a bolt or gasket needs replacing rather than just tightening?…more

Found a slow drip coming from behind the toilet about a month ago — nothing alarming, just a little moisture on the floor that I chalked up to condensation. But it's gotten steadily worse, and now when I try to turn the angle-stop valve fully clockwise to cut the water supply, the flow barely slows down. It's not shutting off the way it should, and I can't tell if the valve is corroded, worn out, or something else entirely.

This is an older home with what looks like original plumbing, and I suspect the hard water here has been doing a number on everything over the years. I've tried cranking the handle as far right as it'll go, but the toilet tank keeps filling like the valve isn't even there. I'd like to figure out whether I can clean or repair the existing valve, or if I need to replace it altogether — and if so, what kind of replacement I should be looking at.…more

During my morning routine I spotted a puddle forming right at the seam where the tank meets the bowl — and it definitely wasn't there yesterday. I've owned this house for about twelve years and this toilet has always been rock solid, so the sudden leak caught me off guard. The water seems to appear mostly after a flush and then sort of seeps down the back of the bowl. Is this a gasket issue, or something more serious I should be worried about?…more

My vacation property came with a toilet seat that was clearly never maintained properly by the previous owner — it wobbles side to side every time anyone sits on it, and the hinge bolts underneath seem to work themselves loose within days of me tightening them. I noticed it during my first walkthrough after closing and assumed it would be a simple fix, but no matter how snug I get those bolts, the seat starts rocking again within a week or two.

I'm only at the property a few times a year, so I can't keep running back to retighten everything. Is there something structurally wrong with the hinges, or am I missing something about how these are supposed to be secured? I'd love a fix that actually holds up between visits rather than a band-aid that comes loose again by the time I return.…more

Found that my toilet tank starts making a constant trickling sound whenever the temperature outside climbs above about 85°F — during cooler months it works perfectly fine. I popped the lid off the tank and it looks like the fill valve is the culprit, maybe warped or worn from the heat cycling, because water just keeps creeping past it. The toilet is about eight or nine years old, two-piece, standard builder-grade setup.

I've never swapped out a fill valve before and I want to make sure I do it right the first time without cracking anything or ending up with a leak under the tank. What's the correct process for pulling the old valve and getting a new one seated and adjusted properly?…more

Three days of heavy rain last week had me stuck indoors with nothing to do but finally research something I've been putting off — adding a bidet to the main bathroom. My house is older and the bathroom fixtures are original, so I'm a little nervous about making changes without breaking something. I've watched a few videos and it looks manageable, but I want to make sure I understand the full process before I start disconnecting things.

I have an older-style toilet with a standard shut-off valve on the wall behind it. Is there anything I should know before buying a bidet attachment or seat? I don't know whether to go with a simple spray attachment or an electric washlet-style seat, and I'm not sure if my setup will handle either type. Any guidance on the steps involved and what to expect would be really appreciated.…more